CST3607 Class Notes 2022-03-31 - ConsciousVibes.com

Contents

News & Tools

DFIRDiva.com : Curated Free and Affordable (Not Over $1,000) IT & Cybersecurity Training with a Focus on Digital Forensics & Incident Response (DFIR) / Blue Team
Secretive Giant TSMC’s $100 Billion Plan To Fix The Chip Shortage
ASML (ASM Lithography) produces the EUV (Extreme Ultraviolet Lithography) machines for semiconductor manufacturers. Advanced Semiconductor Materials International (ASMI) created a new company to develop lithography systems for the growing semiconductor market. Called ASM Lithography.
Why The World Relies On ASML For Machines That Print Chips

Identify the interfaces to be used.
Identify the directly connected networks.
Determine the network address of each network.
Configure the IP address and subnet mask on only those interfaces to be used.
- Double check you’re adding the correct IP address to the proper interface.
Enable the interface(s) : no shutdown
Add the routing protocol
- Add only the network address of each “directly connected” network.

Configuring Router interfaces, and the RIP Routing Protocol

You’ll need a USB Flash drive with at least 200MB of free space to save your labs.
You must be in class this day, and submit a working simulation file, to receive full credit for completing this lab.
When saving, always increment the version number at the end of the filename every time you save. And, save often.
- Starting Filename: CST3607 Lab-<##> YourLastName, YourFirstName v01
Download Lab-03 Assets zip from the Downloads page, containing:
- Packet Tracer Template
- Instructions (PDF)
- Network Diagram (PDF)
- The lab must be done in the current version of Cisco Packet Tracer
Note: Substitute the # within an IP address with the number assigned to you in class. Use all other octets/digits, as written.
After you’ve verified that all of your configurations are complete and accurate, and you’re able to ping from host A to B and from B to A, and the routing tables on both routers are correct, only then e-mail your completed simulation file and configuration text file to me for grading.
- E-mail Subject: CST3607 Lab-03 YourLastName, YourFirstName
Note: Do not use “version 2” when configuring RIP
Important: A fully functional & accurate Lab-03 is required, as it is the starting point/baseline for future labs.

Save the output from diagnostic commands for each router, in one TXT file.
Create a new TXT file with the same filename as the simulation file you’re documenting.
syntax: CST3607 Lab-<##> LastName, FirstName v<version #>.txt
At the top of the TXT file, type your CST3607 Lab-<##> <YourLastName>, <YourFirstname>
Paste the output from all routers into the one TXT file:
1. Make sure all routers have unique names: e.g. hostname 2621-A, 2621-B, etc.
2. Close and reopen the CLI, to clear its history.
3. enable
4. terminal length 0
5. show ip interface brief
6. show ip route
7. show ip protocol
8. show ip ospf neighbor {If using OSPF}
9. show controllers s0/0 or s0/1 {If the router has a DCE interface}
10. show ip dhcp binding {If the router is configured as a DHCP server}
11. show run {Make sure to press the space bar to complete the listing if the CLI says “–More–”}
12. Select all the text in the CLI, then copy.
13. Switch to your TXT file, and paste.
14. Save the TXT file.
15. Repeat for each router in the lab.
Send the TXT file with all router configurations to me: Subject: CST3607 Lab-<##> <YourLastName>, <YourFirstname>

Read Chapter 9: Enhanced Switched Technologies
Do the Written Labs
Answer the Review Questions
- Do not submit your answers for this chapter. The answers are in Appendix.